What about the heating of the hanger shaft of the transmission shaft?
發(fā)布時間：2016.11.29 新聞來源：邢臺遠(yuǎn)拓汽車零部件制造有限公司
Q: shaft hanger bearing heating, the liberation of car, the 150 transmission shaft 2, just started to shell vibration, vibration proof hanger for shaft, fork, sleeve, hanger assembly, then no vibration, a section of the road, hanger bearing heating, hot, that is the hanger, and bought a new installed, or fever, because he put the beam low, not parallel with the gearbox, and the beam increases, or fever, flower bearing position Jian head a little loose, but also for flower arrow, convex element, or fever, was bearing fever, but also for hanger several, but the problem is still had encountered such a situation, but also the liberation of car, 2 hangers, first hanger is changed in Zhanjiang, but also bearing fever, second is the original, after the two mutual exchange, the first one is not hot, second Strip began to heat, suspected bearing problems, the accuracy is not enough, please master pointing!
Answer: Bearing fever may be due to:
1, rolling bearings: bearing lubrication is not sufficient; installation of bearing parts (shafts or holes) different shaft; bearing type selection is inappropriate.
2, sliding bearings: bearing lubrication is not sufficient; bearings with the seat do not appropriate; bearing materials inappropriate choice; bearing pairs of PV values are too large.
You can rule out the situation in accordance with the above, first to find the reason, it is solved. Hope to be of some help to you.
