What are the reasons for the frequent damage to the middle support of the drive shaft?
發(fā)布時(shí)間:2017.05.17 新聞來源:邢臺(tái)遠(yuǎn)拓汽車零部件制造有限公司
1. the clearance between the bolt hole and the bolt of the middle support hanger is too large.
2. frame deformation.
3. the unbalance of the drive shaft is too large.
4. intermediate support hanger, rubber pad aging or poor quality.
5. stent assembly quality problems
6. check the fittings with the extension without wearing
7. check that the drive shaft has no wobble and that if you have a dynamic balance you should be ok.