How to install the middle support of the drive shaft?
發(fā)布時(shí)間：2017.10.30 新聞來源：邢臺(tái)遠(yuǎn)拓汽車零部件制造有限公司
The following methods should be adopted to install the intermediate support of the drive shaft:
1. install the intermediate support first, fix the bolt to a certain extent, do not wring off, use the hand disc to drive the shaft, should be no stuck, rotate the transmission shaft resistance should be smaller.
2. drive the wheel pad, start the engine, rotate at low speed, hang on the low gear, let the drive shaft rotation automatic alignment.
3. fastening bolts shall be fastened after alignment. Attention should be paid to tightening torque.
4., the transmission shaft bending deformation, vibration, should be removed transmission
