亚洲av无码一区二区三区性色|国产精品美女久久久|久久se精品一区精品二区|国产一区二区精品丝袜|99精品国产一区二区|中文字幕在线|国产精品久久久午夜夜伦鲁鲁|巜电车痴汉被爆乳女学生打扑克

Maintenance of drive shaft bracket

1, before the use of the transmission shaft must be in the universal joint, the middle support and sliding spline and other places such as the oil injection injection car special grease.

2, in the car every 7 days or 2000 kilometers must be universal joint, middle support and sliding spline lubrication check, such as bad lubrication should be added to the car special grease. No. 3 lithium lipids should be injected in summer and no. 2 lithium lipids in winter.

3. It is strictly prohibited to use high speed to block the starting, fiercely lift the clutch pedal, overload, overspeed and other non-standard operation.

4, because the transmission shaft fastening bolts in the heavy transmission environment is easy to loose, fall off, so the daily maintenance of the transmission shaft is mainly fastening connection bolts and grease. When the universal joint, middle support, sliding spline and other parts of the transmission shaft are filled with special lubricating grease for cars, the nozzle shall be cleaned and unobstructed first, and the clogged or deformed nozzle shall be replaced in time. The amount of oil injected shall be subject to the overflow of new oil. Check the fastening of bolts and nuts of each part of the drive shaft, especially the fastening bolts of the union bolt and the intermediate support bracket, etc., and tighten them according to the specified torque.